232
Toll Restriction Class – Restriction for
Group Speed Dials
For the Toll Restriction Class you select, Enable
(1) or Disable (0) Code Restriction for Group
Speed Dialing numbers.
0 = Does Not Restrict
1 = Following Restriction Check
Toll Restriction Class – Intercom Call
Restriction
For the Toll Restriction Class you select, Enable
or Disable Intercom Call Restriction. If enabled,
extensions cannot receive Intercom
calls.
Toll Restriction Class – PBX Call Restriction
For the Toll Restriction Class you select, Enable
or Disable PBX Call Restriction.
0 = Disable (No)
1 = Enable (Yes)
Toll Restriction Class – Restriction of Tie
Line Calls
Select whether the Toll Restriction set up in
Program 34-08-01 is Enabled or Disabled.
Toll Restriction Table Data Setup –
International Call Restriction Table
Enter the international dialing codes you want
to restrict.
A maximum of four digits to be
assigned.
Tables 1 ~ 10 =
No Setting
Toll Restriction Table Data Setup –
International Call Permit Code Table
Enter the international dialing codes you want
to permit.
Dial (maximum of six digits)
Tables 1 ~ 20 =
No Setting
Toll Restriction Table Data Setup –
Maximum Number of Digits Table
Assignment
Select the maximum number of digits allowed in
outgoing calls for each table (4 ~ 30).
Toll Restriction Table Data Setup – Common
Permit Code Table
Program codes into the Common Permit Code
Table.
Dial (maximum of four digits)
Table 1 = 911
Table 2 = 1800
Table 3 = 1888
Table 4 = 1822
Table 5 = 1833
Table 6 = 1844
Table 7 = 1855
Table 8 = 1866
Table 9 = 1877
Table 10 = No
Setting
Toll Restriction Table Data Setup – Common
Restriction Table
Program codes into the Common Restrict Code
Table.
Dial (maximum of 12 digits)
Table 1 = 900
Table 2 = 1900
Table 3 = 976
Tables 4 ~ 10 =
No Setting
To Next Page
Loading...
