NEC Univerge SV9100 - Page 274

274
Program
Number
Program Name/Description
Input Data
Default
41-08-02
Overflow Options – Overflow Destination
Assign the overflow mode (0 ~ 9), destination
and announcement message types. Delay
Announcement functions are not available for
pilot number calls. Each Group can have
unique overflow options.
0 = No Setting
1 ~ 64 = Group
65 = Overflow Table (Program
41-09)
66 = Voice Mail Integration
67 = System Speed (Program
41-08-05)
68 = Incoming Ring Group
(Program 41-08-06)
0
41-08-03
Overflow Options – Delay Announcement
Source Type
Assign the overflow mode (0 ~ 9), destination
and announcement message types. Delay
Announcement functions are not available for
pilot number calls. Each Group can have
unique overflow options.
0 = ACI
1 = VRS
2 = InMail
1
41-08-04
Overflow Options – Overflow Transfer Time
Define the time before overflow occurs. Each
Group can have unique overflow options.
0 ~ 64800 seconds
30
41-08-05
Overflow Options – System Speed Dial Bin
Assign the speed dial bin to be used as the
overflow destination. Using a speed dial bin for
Overflow is supported only for off premise calls.
0 ~ 9999 (Used when Program
41-08-02 is set to 5)
9999
41-08-06
Overflow Options – Incoming Ring Group
when Overflow
Assign the Ring Group for overflow calls to go
to.
1 ~ 100
(Used when Program 41-08-02
is set to 68)
1
41-09-01
Overflow Table Setting
Define the group to which a call is transferred
when overflow occurs.
0 ~ 65
0 = No Setting
65 = In-Skin Voice Mail
Integration
0
41-10-01
ACI Delay Announcement – 1st Delay
Announcement ACI Port Number
Define the ACI port number to be used for the
delay announcement. This program is activated
when the delay announcement source and
options are assigned as ACI in Program
41-08-03.
0 ~ 96
0 = No Setting
0
41-10-02
ACI Delay Announcement – 2nd Delay
Announcement ACI Port Number
Define the ACI port number to be used for the
delay announcement.This program is activated
when the delay announcement source and
options are assigned as ACI in Program
41-08-03.
0 ~ 96
0 = No Setting
0
41-10-03
ACI Delay Announcement – 1st Delay
Announcement Connection Timer
Define the time before the 1st Delay
Announcement is played.
0 ~ 64800 seconds
4
41-10-04
ACI Delay Announcement – 2nd Delay
Announcement Connection Timer
Set the time between when the 1st Delay
Announcement plays and when the 2nd Delay
Announcement plays.
0 ~ 64800 seconds
60