NEC Univerge SV9100 - Page 409

409
Program
Number
Program Name/Description
Input Data
Default
15-02-35
Multiline Telephone Basic Data Setup –
Message Waiting Lamp Cycle for Calling
Extension
Select the cycle method that the Large LED
flashes when the extension has set Message
Waiting.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
7
15-02-36
Multiline Telephone Basic Data Setup –
Message Waiting Lamp Cycle for Called
Extension
Select the cycle method that the Large LED
flashes when the extension has Message
Waiting set to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
3
15-02-37
Multiline Telephone Basic Data Setup –
Voice Mail Message Wait Lamp Color
Set up various message wait lamp cycle
options for lamp color.
0 = Green
1 = Red
1
15-02-38
Multiline Telephone Basic Data Setup –
Voice Mail Message Wait Lamp Cycle
Select the cycle method that the Large LED
flashes when the extension has a VM Message
Waiting set to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
3
15-08-01
Incoming Virtual Extension Ring Tone Setup
Assign a ring tone range (0 ~ 8) to incoming
virtual extensions assigned to a Virtual
Extension key (Program 15-07).
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Extension Ring
Tone
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
0
15-10-01
Incoming Virtual Extension Ring Tone Order
Setup
When two or more virtual extensions are set on
a function key on the telephone, and the tone
pattern by which the sound of each extension
differs, the priority of ring sound is set up.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring
Tone
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
Order 1 Pattern
0 = Pattern 1
Order 2 Pattern
1 = Pattern 2
Order 3 Pattern
2 = Pattern 3
Order 4 Pattern
3 = Pattern 4