NEC Univerge SV9100 - Page 410

410
Program
Number
Program Name/Description
Input Data
Default
20-13-49
Class of Service Options (Supplementary
Service) – BLF Indication on CO Incoming
State
Determine if a BLF of the station lights when a
Normal CO call is ringing the phone.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-15-01
Ring Cycle Setup – Normal Incoming Call on
Trunk
Define the ringing cycle for Normal Incoming
Trunk calls.
Ringing Cycle = 1 ~ 13
2
20-15-02
Ring Cycle Setup – PBX, CES Incoming Call
Define the ringing cycle for PBX, CES incoming
calls.
Ringing Cycle = 1 ~ 13
8
20-15-03
Ring Cycle Setup – Incoming Internal Call
Define the ringing cycle for incoming Internal
Calls.
Ringing Cycle = 1 ~ 13
12
20-15-04
Ring Cycle Setup – DID/DISA/VRS
Define the ringing cycle for DID/DISA/VRS
Calls.
Ringing Cycle = 1 ~ 13
8
20-15-05
Ring Cycle Setup – DID/DDI
Define the ringing cycle for DID/DDI calls.
Ringing Cycle = 1 ~ 13
8
20-15-06
Ring Cycle Setup – Dial-In in the E&M Tie
Line
Define the ringing cycle for Dial-In and E&M Tie
Line calls.
Ringing Cycle = 1 ~ 13
12
20-15-07
Ring Cycle Setup – Door Box Ringing for
SLT
Define the ringing cycle for Door Box ringing for
single line telephone.
Ringing Cycle = 1 ~ 13
8
20-15-08
Ring Cycle Setup – Virtual Extension Ring
Define the ringing cycle for Virtual Extension
Ringing.
Ringing Cycle = 1 ~ 13
8
20-15-09
Ring Cycle Setup – Callback
Define the ringing cycle for Callback.
Ringing Cycle = 1 ~ 13
11
20-15-10
Ring Cycle Setup – Alarm for SLT
Define the ringing cycle for Alarm for single line
telephone.
Ringing Cycle = 1 ~ 13
5
20-15-11
Ring Cycle Setup – VRS Waiting Message
Incoming Call
Define the ringing cycle for Incoming VRS
Waiting Message.
Ringing Cycle = 1 ~ 13
6