NEC Univerge SV9100 - Page 496

496
Program
Number
Program Name/Description
Input Data
Default
11-12-33
Service Code Setup (for Service Access) –
Group Hold
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
832
11-12-34
Service Code Setup (for Service Access) –
Answer for Group Hold
If required, redefine the service code used to
answer a specific trunk which is either ringing or
on hold.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
862
11-12-35
Service Code Setup (for Service Access) –
Station Park Hold
Set the service code used for placing a call in a
Personal Park.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
773
11-12-36
Service Code Setup (for Service Access) –
Door Box Access
If the service code for Doorphone Access is not
acceptable, change it here.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
802
11-12-37
Service Code Setup (for Service Access) –
Common Canceling Service Code
Customize the Service Codes used for common
canceling service code access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
720
11-12-38
Service Code Setup (for Service Access) –
General Purpose Indication
Customize the Service Codes used for general
purpose indication access.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
883
11-12-40
Service Code Setup (for Service Access) –
Station Speed Dialing
Customize the station speed access Service
Codes.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
761
11-12-41
Service Code Setup (for Service Access) –
Voice Over
The service code used for the Voice Over
feature.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
890
11-12-42
Service Code Setup (for Service Access) –
Flash on Trunk lines
Customize the Service Codes used for flash on
trunk lines.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
806
11-12-43
Service Code Setup (for Service Access) –
Answer No-Ring Line (Universal Answer)
Customize the service code used to manually
answer a Universal Night Answer.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
872
11-12-44
Service Code Setup (for Service Access) –
Callback Test for SLT
If required, redefine the service code used for
single line telephone Callback Test.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
899