NEC Univerge SV9100 - Page 497

497
Program
Number
Program Name/Description
Input Data
Default
11-12-45
Service Code Setup (for Service Access) –
Enabled On Hook When Holding (SLT)
Customize the Service Codes used for the
enabled on hook when holding (single line
telephone).
SLT
0 ~ 9,
*
, # Maximum of eight
digits
849
11-12-46
Service Code Setup (for Service Access) –
Answer On Hook When Holding (SLT)
Customize the Service Codes used for the
answer on hook when holding (single line
telephone).
SLT
0 ~ 9,
*
, # Maximum of eight
digits
859
11-12-47
Service Code Setup (for Service Access) –
Call Waiting Answer/Split Answer
If required, use this program to change the
code users dial to Split while on a call.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
894
11-12-48
Service Code Setup (for Service Access) –
Account Code
Use to customize the Service Codes used for
the account code.
SLT
0 ~ 9,
*
, # Maximum of eight
digits
891
11-12-50
Service Code Setup (for Service Access) –
General Purpose Relay
Define the service code used for turning the
general purpose relay on and off.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
880
11-12-51
Service Code Setup (for Service Access) –
VM Access (SV9100 InMail and VMS)
Customize the Service Codes used for the VM
access (InMail and VMS).
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
717
11-12-52
Service Code Setup (for Service Access) –
Live Monitoring (SV9100 InMail)
Define access code used for InMail Live
Monitoring (VRS). At default this program is not
set.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
725
11-12-53
Service Code Setup (for Service Access) –
Live Recording at SLT
Customize the Service Codes used for live
recording at single live telephone.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
754
11-12-54
Service Code Setup (for Service Access) –
VRS Routing for ANI/DNIS
Define the service code to use when setting up
ANI/DNIS Routing to the VRS Automated
Attendant. Using the Transfer feature, this also
allows a call to be transferred to the VRS.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
882
11-12-56
Service Code Setup (for Service Access) –
E911 Alarm Shut Off
Select the Service Code that an extension user
can dial to shut off the E911 Alarm Ring.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
No Setting