501
Service Code Setup, Administrative (for
Special Access) – Access in Dial-In
Conversion Table
Customize the access in dial-in conversion
table Service Codes used by the administrator
in the Hotel/Motel feature.
Service Code Setup, Administrative (for
Special Access) – Backup Data Save
This service code is used to back up the
programmed data on the SRAM and Call
History to the Flash ROM. While saving the
database, it may cause system lock up.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup, Administrative (for
Special Access) – System Programming
Mode, Log-On
Customize the system programming mode,
log-on Service Codes used by the administrator
in the Hotel/Motel feature.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup, Administrative (for
Special Access) – Wake on LAN to APSU
Unit
Customize the wake on LAN to APSU unit
Service Codes.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup, Administrative (for
Special Access) – Transfer to Incoming Ring
Group
When a call is transferred using this service
code, it is transferred to the ring group
destination for that incoming trunk. For
example, trunk 2 is in Ring Group 4. When the
call is transferred using this service code, the
trunk rings all extensions programmed for Ring
Group 4 or ring the External Paging Group for
Ring Group 4, depending on how the system is
programmed.
Service Code Setup, Administrative (for
Special Access) – Ethernet Port Reset
Customize the Ethernet port reset Service
Codes.
Service Code Setup, Administrative (for
Special Access) – Extension Data Swap
Ext. Data Swap = xxx (service code in
accordance with Program 11-01).
MLT
0 ~ 9,
*
, # Maximum of eight
digits
Service Code Setup, Administrative (for
Special Access) – Remote Access from
DISA
Customize the service code for Remote Access
for DISA.
To Next Page
Loading...
