NEC Univerge SV9100 - Page 502

502
Program
Number
Program Name/Description
Input Data
Default
11-15-14
Service Code Setup, Administrative (for
Special Access) – Modem Access
Assign the service code used to access the
internal modem on the GCD-CP10.
No Setting
11-16-01
Single Digit Service Code Setup – Step Call
Assign the Single Digit (post-dialing) Service
Codes.
0 ~ 9,
*
, # Maximum of one digit
2
11-16-02
Single Digit Service Code Setup – Barge-In
Set up Item 02 for single digit Barge-In. For
example, you can assign Item 02 to use digit 5
for Barge-In. This would allow you to program a
function key with an extension number plus the
Barge-In code (i.e., 5). This allows one-touch
access to the Barge-In feature for extension.
0 ~ 9,
*
, # Maximum of one digit
No Setting
11-16-03
Single Digit Service Code Setup – Switching
of Voice/Signal Call
Customize the switching of Voice/Signal call
Service Codes used when a busy or ring back
signal is heard.
0 ~ 9,
*
, # Maximum of one digit
1
11-16-04
Single Digit Service Code Setup – Intercom
Off-Hook Signaling
Assign a one-digit service code to be used for
off-hook Signaling.
0 ~ 9,
*
, # Maximum of one digit
*
11-16-05
Single Digit Service Code Setup – Camp-On
Customize the 1-digit Service Code used for
setting Camp-On.
0 ~ 9,
*
, # Maximum of one digit
#
11-16-06
Single Digit Service Code Setup – DND/Call
Forward Override Bypass
Customize the 1-digit Service Code used for
DND/Call Forward Override.
0 ~ 9,
*
, # Maximum of one digit
No Setting
11-16-07
Single Digit Service Code Setup – Message
Waiting
Customize the message waiting Service Codes
used when a busy or ring back signal is heard.
0 ~ 9,
*
, # Maximum of one digit
0
11-16-08
Single Digit Service Code Setup – Voice
Over
Service code used for the Voice Over feature.
0 ~ 9,
*
, # Maximum of one digit
6
11-16-09
Single Digit Service Code Setup – Access to
Voice Mail
Customize the access to voice mail Service
Codes used when a busy or ring back signal is
heard.
0 ~ 9,
*
, # Maximum of one digit
8
11-16-10
Single Digit Service Code Setup –
(Department) STG All Ring Mode
Assign the Single Digit (post-dialing) Service
Code for All Member Ring.
0 ~ 9,
*
, # Maximum of one digit
No Setting