NEC Univerge SV9100 - Page 503

503
Program
Number
Program Name/Description
Input Data
Default
11-16-11
Single Digit Service Code Setup – Station
Park Hold
Customize the one-digit service code used
when placing a call in Personal Park.
0 ~ 9,
*
, # Maximum of one digit
No Setting
11-20-01
Dial Extension Analyze Table – Dial Digits
Use tables 01 ~ 128 to assign the digits to be
dialed using the Dial Extension Analyze Tables.
These tables are used when Program 11-01-01
is set to option 9 = Dial Extension Analyze. Up
to eight digits can be assigned.
Dial maximum of eight digits
(0 ~ 9, #, *, @)
No Setting
11-20-02
Dial Extension Analyze Table – Type of Dials
Assign the Type of Dial for the Extension
Analyze Table from Program 11-20-01.
Type of Dials:
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access 6
= F-Route Access
No Setting
Operation
None