NEC Univerge SV9100 - Page 517

517
Terminals
All Multiline Terminals (using access code)
Multiline Terminal (using line key)
Required Component(s)
PGD(2)-U10 ADP
GCD-CP10
Related Features
Analog Communications Interface (ACI)
Door Box
Paging, External
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-03-01
(1)
ETU Setup (DLCA PKG Setup) – Terminal
Type (B1)
Set up and confirm the Basic Configuration
data for terminal type (B1).
When using a PGD-U10 for general purpose
relay functionality the digital port must be set to
one of the valid PGD settings.
0 = Not Set
1 = Multiline Terminal
3 = Bluetooth Cordless Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Door Box)
9 = PGD (ACI)
10 = DSS Console
11 = --Not Used--
0
10-03-06
ETU Setup (DLCA PKG Setup) – Terminal
Type (B2)
Set up and confirm the Basic Configuration
data for terminal type (B2).
When using a PGD-U10 for general purpose
relay functionality the digital port must be set to
one of the valid PGD settings.
0 = Not Set
6 = PGD(2)-U10 ADP (Paging)
7 = PGD(2)-U10 ADP (Tone
Ringer)
8 = PGD(2)-U10 ADP (Door
Box)
9 = PGD(2)-U10 ADP (ACI)
12 = APR (B2 Mode)
0
10-05-01
General Purpose Relay Setup – Slot No.
Physical Port of DLCA Sensor Circuit No.
Define which relay circuits (5 ~ 8) on the
PGD(2)-U10 ADP are used for General
Purpose Relays.
A maximum of (8) general purpose relay can be
assigned using PGD’s. Relay Circuits 5 ~ 8 can
be assigned on multiple PGD’s.
Ex. PGD 1 has relay circuits 5 ~ 8 assigned to
system Relay 1 ~ 4. PGD 2 can have relay
circuits 5 ~ 8 assigned to system Relay 5 ~ 8.
Slot No: 0 ~ 24
DCLA Port: 0 ~ 16
Relay No: 0, 5 ~ 8
After each entry, press
Transfer to advance to the next
entry.
0 - 0 - 0
Program
Number
Program Name/Description
Input Data
Default