546
Multiline Telephone Basic Data Setup –
Automatic Hold for CO Lines
When talking on a CO call, and another line key
is pressed, the original trunk is placed on Hold
or disconnected.
0 = Hold
1 = Disconnect (Cut)
Multiline Telephone Basic Data Setup –
Callback Automatic Answer
Enable/Disable Callback Automatic Answer.
Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
Trunk Access Maps: 1 ~ 400
Programmable Function Keys
Assign a function key for Exclusive Hold (code
45). If an extension has its fixed Hold key
reassigned in Program 15-02-06, assign a
function key for System Hold (code 44).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
(
*
03 + ICM = VE or CAR where
ICM is the extension number of
the VE or CAR)
Department Group Assignment for
Extensions
Set up the Department Group called by the pilot
number and the extension priority when a group
is called.
Call Pickup Groups are set up in Program
23-02.
Department Groups 1 ~ 64
Priority 1 ~ 9999
Default = 1
extensions in
Department
Group 1 with
priority in port
order:
Port 1 priority = 1
Port 960 priority
= 960
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
Class of Service Options (Hold/Transfer
Service) – Group Hold Initiate
Turn Off or On an extension user ability to
initiate Group Hold (Service Code 732).
Class of Service Options (Hold/Transfer
Service) – Group Hold Answer
Turn Off or On an extension user ability to pick
up a call placed on Group Hold (Service Code
762).
Class of Service Options (Hold/Transfer
Service) – Operator Transfer After Hold
Callback
Turn Off or On an extension user ability to have
a call, which recalls from Hold, transfer to the
operator.
To Next Page
Loading...
