NEC Univerge SV9100 - Page 561

561
Program
Number
Program Name/Description
Input Data
Default
42-03-06
Class of Service Options (Hotel/Motel) –
Room Status Change for Other Extension
Set the Hotel/Motel room status change for
other extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-07
Class of Service Options (Hotel/Motel) –
Restriction Class Changing for Other
Extension
Set the Hotel/Motel restriction class changing
for other extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-08
Class of Service Options (Hotel/Motel) –
Room to Room Call Restriction
Set the Hotel/Motel room to room call restriction
COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-09
Class of Service Options (Hotel/Motel) –
DND Setting for Own Extension
Set the Hotel/Motel DND setting for own
extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-10
Class of Service Options (Hotel/Motel) –
Wake Up Call Setting for Own Extension
Set the Hotel/Motel wake up call setting for own
extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-11
Class of Service Options (Hotel/Motel) –
Change Room Status for Own Extension
Set the Hotel/Motel change room status for own
extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-12
Class of Service Options (Hotel/Motel) – SLT
Room Monitor
Enable/Disable a single line telephone ability to
use Room Monitor.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-13
Class of Service Options (Hotel/Motel) –
PMS Restriction Level
Enable/Disable the attendant’s ability to change
the outgoing restriction class for hotel phones.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-04-01
Hotel Mode One-Digit Service Codes
Set up the Hotel Mode one-digit service codes
assigned in Program 42-02-01.
1 ~ 64 (Calling Group)
Maximum of eight digits
1 ~ 9, 0, *, #
No Setting
42-05-01
Hotel Room Status Printer – Output Port
Type
Set the LAN port to output the Hotel Data
(Check-Out sheet, Room Status, etc.) and the
output port type options for the Hotel/ Motel
feature.
0 = No Setting
1 = Not Used
3 = LAN
0
42-05-03
Hotel Room Status Printer – Wake Up Call
No Answer Data
Set the LAN port to output the Hotel Data
(Check-Out sheet, Room Status, etc.) and the
wake up call no answer data options for the
Hotel/ Motel feature.
0 = Not Output
1 = Output
0