NEC Univerge SV9100 - Page 560

560
Program
Number
Program Name/Description
Input Data
Default
42-02-01
Hotel/Motel Telephone Setup – Hotel Mode
If you want an extension to operate in the Hotel/
Motel mode, enter 1. If you want the telephone
to operate in the business mode, enter 0.
0 = Normal
1 = Hotel
0
42-02-02
Hotel/Motel Telephone Setup – Toll
Restriction Class When Check In
Assign an extension Toll Restriction Class when
it is checked in. The system has 15 Toll
Restriction Classes (1 ~ 15). The entry you
make in this option affects the telephone in all
Night Service modes. (Refer to Programs 21-05
and 21-06 to set up the Toll Restriction dialing
options.) When the extension is checked out, it
uses the Toll Restriction Class set in Program
21-04.
1 ~ 15
1
42-02-03
Hotel/Motel Telephone Setup – Room Status
This is a read only program that shows the
current room status setting.
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
*
= Reserve 5
# = Reserve 6
No Setting
42-03-01
Class of Service Options (Hotel/Motel) –
Check-In Operation
Set the Hotel/Motel check-in operation COS
options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-02
Class of Service Options (Hotel/Motel) –
Check-Out Operation
Set the Hotel/Motel check-out operation COS
options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-03
Class of Service Options (Hotel/Motel) –
Room Status Output
Set the Hotel/Motel room status output COS
options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-04
Class of Service Options (Hotel/Motel) –
DND Setting for Other Extension
Set the Hotel/Motel DND setting for other
extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0
42-03-05
Class of Service Options (Hotel/Motel) –
Wake up Call Setting for Other Extension
Set the Hotel/Motel wake up call setting for
other extension COS options.
0 = Off
1 = On
COS 1 ~ 15 = 0