NEC Univerge SV9100 - Page 559

559
Program
Number
Program Name/Description
Input Data
Default
30-02-01
DSS Console Extension Assignment –
Extension Number
Define the extension number for the multiline
terminal connected with the DSS console (up to
eight digits).
Maximum of eight digits
No Setting
30-03-01
DSS Console Key Assignment
Customize DSS Console keys to function as
DSS keys, Service Code keys, Programmable
Function Keys, and One-Touch Calling keys.
The key [when defined as a DSS/One-Touch
key (code 01)] can have any function up to four
digits (e.g., extension number or Service Code).
The function information (such as extension
number or Service Code) would then be
entered as the additional data.
Key Number
001 ~ 114
0 ~ 99 (General Functional
Level)
97 = Door Box Access key
(additional data: 1 ~ 8 Door Box
No.)
* 00 ~ * 99 (Appearance
Functional Level)
42-01-01
System Options for Hotel/Motel – Answering
Message Mode for Wake Up Call (Hotel
Mode)
Assign the answering message mode for wake
up call options for Hotel/Motel Service.
0 = MOH (Hold Time)
1 = VRS Message
2 = VRS Message + Time
0
42-01-02
System Options for Hotel/Motel – Wake Up
Call Message Assignment
VRS Message for Wake Up Calls. You must
make an entry for this program if you have
selected 1 or 2 in Item 1 above.
0 ~ 100
(0 = No Setting)
0
42-01-03
System Options for Hotel/Motel – Wake Up
Call No Answer
Assign the wake up call no answer options for
Hotel/Motel Service.
0 = No Transfer
1 = Transfer to the Operator
0
42-01-04
System Options for Hotel/Motel – Setup
Message Mode for Wake Up Call (Hotel
Mode)
Assign the setup message mode for wake up
call (hotel mode) options for Hotel/Motel
Service.
0 = Fixed Message
1 = VRS Message
2 = Time Information and VRS
0
42-01-05
System Options for Hotel/Motel – Wake Up
Call Message Assignment
Assign the wake up call message assignment
options for Hotel/Motel Service.
0 ~ 100
(0 = No Setting)
0
42-01-06
System Options for Hotel/Motel – Flexible
Room Status
Use this option to enable (1) or disable (0) for
the system to change from any status code to
any other status code. Refer to Valid Room
Status Changes when Program 42- 01- 06
i s s e t t o 0 ( D i s a b l e d ) above and in
the PMS Developer Guide for valid status code
changes when this program is disabled.
0 = Disabled
1 = Enabled
0