NEC Univerge SV9100 - Page 558

558
Program
Number
Program Name/Description
Input Data
Default
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-13-11
Class of Service Options (Supplementary
Service) – Room Monitor, Initiating
Extension
Turn Off or On an extension user ability to
Room Monitor other extensions.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-13
Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-16
Class of Service Options (Supplementary
Service) – Barge-In, Receive
Turn Off or On Barge-In at the receiving
extension (i.e., Barge-In receive).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-17
Class of Service Options (Supplementary
Service) – Barge-In Tone/Display (Intrusion
Tone)
Turn Off or On the Barge-In (Intrusion) Tone. If
disabled, this also turns off the Barge-In display
at the called extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-40
Class of Service Options (Supplementary
Service) – Do Not Disturb
Turn Off or On an extension user ability to set or
cancel Do Not Disturb.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-15-10
Ring Cycle Setup – Alarm for SLT
Define the ring cycle for Alarm for SLT
terminals.
Ringing Cycle = 1 ~ 13
5
20-17-01
Operator Extension – Operator’s Extension
Number
Define the extension numbers used by
operators.
Maximum of eight digits
101
20-35-01
Extension’s Operator Setting
Assign an extension to an operator group.
0 ~ 15
0
30-01-01
DSS Console Operating Mode
Set the mode of the system DSS Consoles.
This option applies to all system DSS
Consoles.
0 = Business Mode
1 = Hotel Mode
2 = Monitor Mode
3 = Business/ Mode
0