600
SV9100 InMail Routing Mailbox Options –
Routing Mailbox Type
Set the Routing Mailbox type.
0 = None
1 = Call Routing
2 = Announcement
3 = Directory
4 = Distribution
Mailboxes
01 ~ 08 = 1
(Call Routing)
Mailboxes
09 ~ 32 = 2
(Announcement)
Call Routing Mailbox Options – Dial Action
Table
Assign the Dial Action Table to the Call Routing
Mailbox. The Dial Action Table defines the
dialing options for the call Routing Mailbox.
1 ~ 32
(Dial Action Table 1 ~ 32)
Call Routing Mailbox Options – Screened
Transfer Timeout
Set the time a Screened Transfer (TRF) from
the Automated Attendant rings an unanswered
extension before recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling]
Options: Delay Rings Before Redirect Transfer
in InMail.
0 ~ 255 seconds
Entering 0 causes immediate
recall.
Call Routing Mailbox Options – Time Limit
for Dialing Commands
Determine the time InMail waits for an
Automated Attendant caller to dial before
routing the call to the Timeout destination. Be
sure your Dial Action Tables have a Timeout
action programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a
Timeout action programmed, the caller routes
to that destination.
When the associated Dial Action Table does not
have a Timeout action programmed, the
Instruction Menu repeats three times and then
InMail hangs up.
0 ~ 99 seconds
Entering 0 causes the
Automated Attendant to
immediately route callers to the
Timeout destination
programmed in the active Dial
Action Table.
Call Routing Mailbox Options – Fax
Detection
Enable/Disable Fax detection for the Call
Routing Mailbox. When Enabled, the InMail
Automated Attendant (when using this mailbox)
detects incoming Fax CNG tone. The Fax then
routes to the company Fax Machine according
to the setting in Program 47-01-06: Fax
Extension. When Disabled, the Automated
Attendant does not detect incoming Fax calls.
To Next Page
Loading...
