601
Announcement Mailbox Options – Next Call
Routing Mailbox
If you set up an Announcement Mailbox to
answer Automated Attendant calls, use this
option to provide additional routing options to
the Automated Attendant callers. This option
interacts with Repeat Count and Hang Up After
below.
For more detail on this interaction, refer to
Direct Announcement Mailbox Routing and
Routed Announcement Mailbox Routing in the
InMail System Guide.
Call Routing Mailbox
Number (1 ~ 32)
0 = Undefined
Announcement Mailbox Options – Repeat
Count
Enter the number of times you want the
Announcement Mailbox message to repeat to
callers. After an Announcement Mailbox caller
initially listens to the message, it repeats the
number of times specified in this option. This
option interacts with Next Call Routing Mailbox
and Hang Up After when providing routing
options.
For more detail on this interaction, refer to
Direct Announcement Mailbox Routing and
Routed Announcement Mailbox Routing in the
InMail System Guide.
0 (No Repeats)
1 ~ 10 (Announcement
repeats 1 ~ 10 times)
Announcement Mailbox Options – Hang Up
After
Use this option along with Next Call Routing
Mailbox and Repeat Count above to provide
additional routing options to Automated
Attendant callers.
For more detail on this interaction, refer to
Direct Announcement Mailbox Routing and
Routed Announcement Mailbox Routing in the
InMail System Guide.
0 = None
1 = Goodbye
2 = Silent
SV9100 InMail Trunk Options – Answer
Table Assignment
Assign an InMail Answer Table to each Direct
Inward Line (DIL) the Automated Attendant
should answer. The Automated Attendant
follows the routing specified by the selected
Answer Table.
InMail Answer Table Options – Answer
Schedule Override
Enable/Disable Answer Schedule Override for
the selected Answer Table. If enabled (and you
make an entry for Override Mailbox below), the
active Answer Table routes calls to the Override
Mailbox.
To Next Page
Loading...
