NEC Univerge SV9100 - Page 603

603
Program
Number
Program Name/Description
Input Data
Default
47-11-03
InMail Answer Table Options – Default
Mailbox Category
Specify the category of mailbox used as the
Default Mailbox. InMail mailbox categories are
Subscriber Mailbox, Master Mailbox, and
Routing Mailbox. InMail uses the Default
Mailbox when an Answer Schedule is not in
effect.
InMail handles the routing according to the type
of mailbox (Subscriber, Call Routing, or
Announcement) within the specified category:
If the Default Mailbox is a Subscriber
Mailbox, the outside caller hears the mailbox
greeting (if recorded) and can leave a
message.
If the Default Mailbox is an Announcement
Mailbox, the outside caller hears the
recorded announcement. Depending on
how the Announcement Mailbox is
programmed, InMail then hangs up,
reroutes the call, or provides additional
dialing options.
If the Default Mailbox is a Call Routing
Mailbox, the outside caller hears the
instruction menu and can dial any option
allowed by the associated Dial Action Table.
If any Input Data value is entered, the terminal
displays the Default Mailbox Number selection
(below).
0 = Undefined
1 = Subscriber Mailbox - STA
2 = Group Mailbox
3 = Routing Mailbox
Answer Table 1 =
3
Answer
Table 2 ~ 16 = 0
InMail Answer Table Options – Default
Mailbox Number
Set the Answer Table Default Mailbox number.
InMail uses the Default Mailbox when an
Answer Schedule is not in effect. By default,
this occurs at all times other than Monday
through Friday from 8:30 AM to 5:00 PM.
Digits (maximum of three using
0 ~ 9)
Answer Table 1 =
1
Answer Table
2 ~ 16 = No
Entry
47-11-04
InMail Answer Table Options – Next Answer
Table
When 10 Answer Schedules in an Answer
Table are not enough, use this option to link two
Answer Tables together. InMail treats the two
linked tables as a single 20 entry Answer Table.
Answer Table
(1 ~ 16)
0 = Undefined
0