NEC Univerge SV9100 - Page 695

695
Program
Number
Program Name/Description
Input Data
Default
10-46-01
DT800/DT700 Server Information Setup –
Register Mode
Normal mode:
When the phone boots up, it reports the ext.
assigned in the phone or chooses the next
available extension in the system. No
password is required.
Auto mode:
If set to Auto, the SIP user name and password
must be entered in the actual IP phone. These
settings must match 84-22/15-05-27, for the
phone to come on-line.
Manual mode:
When the phone boots up it prompts a user to
enter a user ID and password before logging in.
It checks the user ID/password against 84-22/
15-05-27. If there is no match, the phone does
not come on-line.
0 = Normal
1 = Auto
2 = Manual
0
10-54-01
License Configuration for Each Package –
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
If applying more than 255 licenses to a slot, the
licenses must be applied across multiple
indexes.
For example, assigning 256 VoIP resource
licenses (5103) to the CPU slot could be
assigned using different methods as long as the
total for the CPU slot is 256.
1. Index 1 has 128 of feature code 5103 and
index 2 also has 128 of feature code 5103 for a
total of 256.
2. Index 1 has 255 of feature code 5103 and
index 2 has 1 of feature code 5103 for a total of
256.
1 ~ 255 Resource Licenses
0
15-05-15
IP Telephone Terminal Basic Data Setup –
CODEC Type
Set the registered IP Phone Codec type –
Reference Program 84-24 DT800/DT700
Codec Basic Information.
1- Type 1
2- Type 2
3- Type 3
4- Type 4
5- Type 5
1