NEC Univerge SV9100 - Page 696

696
Program
Number
Program Name/Description
Input Data
Default
15-05-26
IP Telephone Terminal Basic Data Setup –
DT800/DT700 Terminal Type
Set the DT800/DT700 series terminal type.
0 = Not Set
1 = ITL-( )E-1D/IP-( )E-1
2 = ITL-( )D-1D/ITL-12BT-1D/
ITL- 12PA-1D [without
8LKI(LCD)-L]
3 = ITL-( )D-1D/ITL-12BT-1D/
ITL-12PA-1D [with 8LKI(LCD)-L]
4 = ITL-320C-1
5 = Softphone
6 = CTI
7 = AGW
10 = ITL-12DG-3
11 = ITL-12CG-3
12 = ITL-0-1
13 = ITZ-**-*D/ITZ-**PD-*D/
ITZ-**pA-*D
14 = ITZ-*CG
15 = ITZ-*DE
16 = ITZ-*LDE
0
15-05-39
IP Telephone Terminal Basic Data Setup –
CTI Override Mode
Enable/Disable the ability of a station to be
overridden when CTI is active.
0 = Disable
1 = Enable
0
15-05-50
IP Telephone Terminal Basic Data Setup –
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
0 = Disable
1 = Enable
1
84-10-01
ToS Setup – ToS Mode
When Input Data is set to 1, Protocol 7 is
invalid. When Data is set to 2, Protocols 2 ~ 6
are invalid.
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
0
84-10-07
ToS Setup – Priority (D.S.C.P. -
Differentiated Services Code Point)
DSCP (Differentiated Services Code Point).
0 ~ 63
0
84-22-01
DT800/DT700 Multiline Logon Information
Setup – User ID
Input the User ID for each Personal ID Index
(1-960) when using auto or manual registration
in 10-46-01.
IP multiline terminals only support numerical
user IDs, not alphanumeric.
Maximum of 32 characters
No Setting
84-22-02
DT800/DT700 Multiline Logon Information
Setup – Password
Input the Password for each Personal ID Index
(1-960) when using manual or auto registration
in Program 10-46-01.
Maximum of 16 characters
No Setting