NEC Univerge SV9100 - Page 708

708
Supported System Feature List (Continued)
Feature Name
ML440
G566
G266
Comments
Cordless Telephone Connection
No
No
No
Data Line Security
Yes
No
No
Delayed Ringing
Yes
No
No
Department Calling
Yes
Yes
Yes
Department Step Calling
Yes
No
No
Desktop Suite
No
No
No
Dial Pad Confirmation Tone
No
No
No
Dial Tone Detection
No
No
No
Dialing Number Preview
No
Yes
Yes
This is a function of the handset.
Direct Inward Dialing (DID)
Yes
Yes
Yes
Direct Inward Line (DIL)
Yes
Yes
Yes
Direct Inward System Access
(DISA)
No
No
No
Direct Station Selection Key
No
No
No
Direct Station Selection (DSS)
Console
No
No
No
A DSS Console cannot be associated with a ML440/
G566/G266 handset.
Directed Call Pickup
Yes
No
No
Directory Dialing
No
No
No
This is a function of the ML440/G566/G266 handset.
Distinctive Ringing, Tones and
Flash Patterns
No
No
No
Ring tones can be changed on the ML440/G566/G266
handset only.
Do Not Disturb
Yes
Yes
Yes
ML440 – Do Not Disturb (DND) can be set using dial
access codes or a function key but no confirmation
tones are provided.
G566/G266 – Do Not Disturb (DND) can be set using
dial access codes only.
Door Box
Yes
Yes
Yes
ML440 – A Door Box will not ring a ML440 phone but
will flash the large LED. A ML440 can call a door box
but cannot activate a relay to open the door.
G556/G266 – A Door Box will ring a G566/G266 but
they cannot activate a relay to open the door. A G566/
G266 can call a door box but cannot activate a relay to
open the door.
Drop Key
Yes
No
No
E911/911
Yes
No
No
Flash
No
No
No
Flexible System Numbering
Yes
Yes
Yes
Flexible Timeouts
Yes
Yes
Yes
Forced Trunk Disconnect
No
No
No
Group Call Pickup
Yes
Yes
Yes
Group Listen
No
No
No