NEC Univerge SV9100 - Page 709

709
Supported System Feature List (Continued)
Feature Name
ML440
G566
G266
Comments
Handset Mute
Yes
Yes
Yes
This is a function of the handset.
Handsfree
Yes
Yes
Yes
This is a function of the handset.
Handsfree Answerback/Forced
Intercom
No
No
No
Headset Operation
Yes
Yes
Yes
This is a function of the handset.
Hold
Yes
Yes
Yes
G566/G266 supported system hold only.
Hotel/Motel
No
No
No
Hotline
Yes
No
No
Ml440 – The ML440 does not follow Hotline for
speaker 20-08-19 only Hotline for hand piece
20-08-09.
Howler Tone Service
No
No
No
InMail
Yes
Yes
Yes
Voice mail softkeys are not provided to handset. Live
monitor is not supported.
Intercom
Yes
Yes
Yes
IP Multiline Station (SIP)
Yes
No
No
IP Single Line Telephone (SIP)
No
Yes
Yes
IP Trunk – (SIP) Session Initiation
Protocol
Yes
Yes
Yes
IP Trunk – H.323
Yes
Yes
Yes
ISDN Compatibility
Yes
Yes
Yes
K-CCIS – IP
Yes
Yes
Yes
The following programs must be disabled, set to 0,
when using a ML440 handset in a CCISoIP network:
Peer-to-Peer – 15-05-50 (0)
Link Reconnect – 50-06-01 (0)
K-CCIS – T1
Yes
Yes
Yes
Last Number Redial
Yes
Yes
Yes
Call Redial function is a function of the handset.
Line Preference
Yes
No
No
Long Conversation Cutoff
Yes
Yes
Yes
With ML440 an alarm tone is not provided before
cutoff.
Meet Me Conference
Yes
No
No
The ML440 can initiate a Meet Me Conference but
cannot receive internal pages to join an internal Meet
Me Conference.
Meet Me Paging
Yes
Yes
Yes
Can initiate a Meet Me Paging but cannot receive
internal pages to respond to an Internal Meet Me
Page.
Meet Me Paging Transfer
Yes
Yes
Yes
Can initiate a Meet Me Paging Transfer but cannot
receive internal pages to respond to an Internal Meet
Me Transfer page.
Memo Dial
No
No
No
Message Waiting Indication (MWI)
Yes
No
No
ML440 only supports voice mail MWI.
Microphone Cutoff
Yes
Yes
Yes
This is a function of the ML440 handset.