NEC Univerge SV9100 - Page 710

710
Supported System Feature List (Continued)
Feature Name
ML440
G566
G266
Comments
Multiple Trunk Types
Yes
Yes
Yes
Music on Hold
Yes
Yes
Yes
Intercom Calls:
– ML440 does not receive MOH.
– G566/G266 does receive MOH.
Trunk Calls:
– All handsets receive MOH from distant system.
Name Storing
No
No
No
NEC Interactive Voice Response
Yes
Yes
Yes
NetLink
Yes
Yes
Yes
Night Service
No
No
No
Off-Hook Signaling
No
No
No
Off-Premise Extension
No
No
No
One-Touch Calling
Yes
No
No
Must press line key then go Off-hook on ML440 for
stored number to be dialed.
Operator
No
No
No
A wireless handset should not be used as an operator
phone.
Paging, External
Yes
Yes
Yes
A ML440/G566/ZG266 can only initiate an External or
All Call Page. It cannot receive either Internal or All
Call Pages or display page information.
Paging, Internal
Yes
Yes
Yes
A ML440/G566/ZG266 can only initiate an External or
All Call Page. It cannot receive either Internal or All
Call Pages or display page information.
Park
Yes
Yes
Yes
PBX Compatibility
Yes
Yes
Yes
PC Programming
Yes
Yes
Yes
Personal Park
Yes
No
No
Power Failure Transfer
No
No
No
Prime Line Selection
Yes
Yes
Yes
Prime Line Selection can be assigned for ML440/
G566/G266 handsets. However, when this is done the
phone cannot access ICM dial tone.
Private Line
Yes
Yes
Yes
Programmable Function Keys
Yes
No
No
Programming from a Multiline
Terminal
No
No
No
Pulse to Tone Conversion
Yes
No
No
PVA Conference Bridge
Yes
No
No
Quick Transfer to Voice Mail
Yes
Yes
Yes
– ML440 can receive and make Quick Transfer to VM
calls.
– G566/G266 can only receive Quick Transfer to VM
calls.
Repeat Redial
Yes
No
No