NEC Univerge SV9100 - Page 723

723
Feature Support Table for Standard SIP Device (Continued)
Feature Name
Standard
SIP
Comments
Call Forwarding
Yes
Can be programmed in 24-09-xx, through feature code
from administrator desk set and from the SIP device using
dial access codes. In some cases Call Forwarding can be
set on SIP device itself but this not system side
forwarding.
Call Forwarding with Follow Me
No
Call Forwarding – Park and Page
No
Call Forwarding, Off-Premise
Yes
Can be programmed in 24-09-xx, through feature code
from administrator desk set and in some cases from the
SIP device using dial access codes.
Call Forwarding/Do Not Disturb Override
Yes
Call Monitoring
No
Call Redirect
No
Call Waiting/Camp-On
No
Callback
Yes
Caller ID Caller Return
Yes
Caller ID Call Return is a SIP device feature not a system
feature.
Caller ID
Yes
Caller ID is shown only on ISDN, SIP or Analog CO trunks
that are directed at the SIP device. Caller ID will not
display for calls transferred to the SIP device.
Call Transfer
Yes
Only Announce/Supervised transfer is supported.
Central Office Calls, Answering
Yes
Central Office Calls, Placing
Yes
Class of Service
Yes
Clock/Calendar Display
No
CO Message Waiting Indication
No
Code Restriction
Yes
Code Restriction Override
No
Code Restriction, Dial Block
Yes
Computer Telephony Integration (CTI)
Applications
No
Conference
No
Conference, Voice Call/Privacy Release
No
Contact Centre
No
Cordless Telephone Connection
No
Data Line Security
Yes
Delayed Ringing
No