NEC Univerge SV9100 - Page 726

726
Feature Support Table for Standard SIP Device (Continued)
Feature Name
Standard
SIP
Comments
One-Touch Calling
No
Operator
Yes
(OPX) Off-Premise Extension
No
Paging, External
Yes
A SIP device can only initiate an Internal, External or All
Call Page. It cannot receive either Internal or All Call
pages or display page information.
Paging, Internal
Yes
A SIP device can only initiate an Internal, External or All
Call Page. It cannot receive either Internal or All Call
pages or display page information.
Park
No
PBX Compatibility
Yes
PC Programming
Yes
Power Failure Transfer
No
Prime Line Selection
Yes
Prime Line Selection can be assigned for Standard SIP
devices, however when this is done the telephones
cannot access ICM dial tone.
Private Line
Yes
Programmable Function Keys
No
Programming from a Multiline Terminal
No
Pulse to Tone Conversion
No
Quick Transfer to Voice Mail
Yes
Multiline Telephones can Quick Transfer to a SIP device’s
mailbox, but a SIP device cannot execute Quick Transfer.
Redial Function
No
Call Redial Function is a function of the client device and
not the system.
Repeat Redial
No
Reverse Voice Over
No
Ring Groups
Yes
Ringdown Extension, Internal/External
Yes
A SIP device can be a ring down destination but cannot
originate a ring down call.
Room Monitor
No
Save Number Dialed
No
Secondary Incoming Extension
No
Secretary Call (Buzzer)
No
Secretary Call Pickup
No
Selectable Display Messaging
No
Selectable Ring Tones
Yes
Selectable Ring Tones is a function of the client device.
Serial Call
No