NEC Univerge SV9100 - Page 748

748
Guide to Feature Programming
 The items highlighted in gray are read only and cannot be changed.
Program
Number
Program Name/Description
Input Data
Default
10-03-01
ETU Setup (GPZ-IPLE Pkg) – Trunk Logical
Port Number
Displays the port number assigned to the
GPZ-IPLE.
0 ~ 200
0
10-03-02
ETU Setup (GPZ-IPLE Pkg) – Trunk Type
Define if the IP Trunks are H.323 or SIP.
0 = H.323
1 = SIP
1
10-12-03
GCD-CP10 Network Setup – Default
Gateway
Assign the default gateway IP address for the
GCD-CP10.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-09
GCD-CP10 Network Setup – IP Address
Set IP address for GPZ-IPLE.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
10-12-10
GCD-CP10 Network Setup – Subnet Mask
Define the Media Gateway Subnet Mask
Address.
128.0.0.0 | 192.0.0.0 | 224.0.0.0
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
|254.0.0.0 | 255.0.0.0
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
|255.254.0.0 | 255.255.0.0
|255.255.128.0 | 255.255.192.0
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
255.255.0.0
10-17-02
H.323 Gatekeeper Setup – Gatekeeper IP
Address
Define the Gatekeeper IP address for H.323.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-17-04
H.323 Gatekeeper Setup – Preferred
Gatekeeper
When 10-17-01 is set to 1, this is used and sets
the preferred ID of multiple gatekeepers.
Maximum of 124 characters.
No Setting
10-18-01
H.323 Alias Address Setup – Alias Address
Set the telephone number (Alias Address) to
external gatekeeper.
Dial maximum of 12 digits
(0 ~ 9, *, #)
No Setting
10-18-02
H.323 Alias Address Setup – Alias Address
Type
Set the Alias Address Type to external
gatekeeper.
0 = E164
0