NEC Univerge SV9100 - Page 749

749
Program
Number
Program Name/Description
Input Data
Default
10-23-01
SIP System Interconnection Setup – System
Interconnection
Determine if the system is interconnected to
another system.
0 = No (Disable)
1 = Yes (Enable)
0
10-23-02
SIP System Interconnection Setup – IP
Address
Define the IP Address for the SIP System
Interconnection.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-23-04
SIP System Interconnection Setup – Dial
Number
Define the Dial Number for the SIP System.
Maximum of 12 digits (0 ~ 9).
No Setting
10-54-01
License Configuration for Each Package –
License Code
Assign VoIP Resource Licenses (5103) to
GCD-CP10 slot (1).
If applying more than 255 licenses to a slot, the
licenses must be applied across multiple
indexes.
For example, assigning 256 VoIP resource
licenses (5103) to the CPU slot could be
assigned using different methods as long as the
total for the CPU slot is 256.
1. Index 1 has 128 of feature code 5103 and
index 2 also has 128 of feature code 5103 for a
total of 256.
2. Index 1 has 255 of feature code 5103 and
index 2 has 1 of feature code 5103 for a total of
256.
1 ~ 255 Resource Licenses
0
10-68-01
IP Trunk Availability – Trunk Type
Set trunk type to CCISoIP for interconnecting
trunks.
0 = None
1 = SIP
2 = H.323
3 = CCIS
0
10-68-02
IP Trunk Availability – Start Port
Set the trunk port number to start the
assignment from.
0 ~ 400
0
10-68-03
IP Trunk Availability – Number of Ports
Set the number of ports to assign from the
starting point set in Program 10-68-02.
0 ~ 400
0
14-02-01
Analog Trunk Data Setup – Signaling Type
(DP/DTMF)
Set the outgoing signaling type for the tie trunk.
0 = Dial Pulse (10 PPS)
1 = Dial Pulse (20 PPS)
2 = DTMF
2