NEC Univerge SV9100 - Page 785

785
Related Features
None
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
10-12-03
GCD-CP10 Network Setup – Default
Gateway
Assign the default gateway IP address for the
GCD-CP10.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-07
GCD-CP10 Network Setup – NAPT Router IP
Address (Default Gateway [WAN])
Assign the WAN address of the router that the
CCPU is using for NAT.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-09
GCD-CP10 Network Setup – IP Address
Set IP address for GPZ-IPLE.
The IP Address assigned in Program 10-12-01
cannot start with the same leading digits as the IP
Address assigned here.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10