NEC Univerge SV9100 - Page 789

789
Program
Number
Program Name/Description
Input Data
Default
84-13-28
SIP Trunk CODEC Information Basic Setup –
Audio Capability Priority
Define the Codec Priority for voice session
establishment.
0 = G.711_PT
2 = G.729_PT
3 = G.722_PT
4 = G.726_PT
6 = G711_Fix
7 = G729_Fix
(Profile 1 ~ Profile 2)
0
84-33
SIP Extension IP CODEC Information Basic
Setup – Index 1 - Trunk Type
Set the type of SIP trunk for Fax through SIP
trunk.
1 = H.323 Trunk
2 = Networking
3 = SIP Trunk
4 = SIP Extension
5 = CCIS over IP
1
84-33-01
SIP Extension IP CODEC Information Basic
Setup – FAX Relay Mode
Enable/Disable the FAX relay mode. Port mode
is used to enable Fax relay per port settings in
Program 15-03-03.
0 = Disable
1 = Enable
2 = Each Port Mode
0
84-33-12
FAX Over IP Setup – FAX Codec
Setup the Codec for Fax exchange.
1 = G.711 a-law
2 = G.711 u-law
3 = G726
(Profile 1 ~ Profile 2)
2 = US
1 = other
84-33-13
FAX Over IP Setup – Payload Size
Set up the payload size.
1 ~ 4 (10ms base)
(Profile 1 ~ Profile 2)
2 (20ms)
84-33-14
FAX Over IP Setup – Jitter Buffer Mode
Static mode will use value defined in average
jitter buffer. Self-adjusting automatically adjusts
values between minimum and maximum jitter
buffers defined.
1 = Static
2 = Self Adjusting
(Profile 1 ~ Profile 2)
1
84-33-15
FAX Over IP Setup – Minimum Jitter Buffer
Setup FAX over IP Codec settings when using
CCIS over IP.
0 ~ 300
(Profile 1 ~ Profile 2)
80
84-33-16
FAX Over IP Setup – Average Jitter Buffer
Setup FAX over IP Codec settings when using
CCIS over IP.
0 ~ 300
(Profile 1 ~ Profile 2)
120
84-33-17
FAX Over IP Setup – Maximum Jitter Buffer
Setup FAX over IP Codec settings when using
CCIS over IP.
0 ~ 300
(Profile 1 ~ Profile 2)
160
84-33-18
FAX Over IP Setup – RTP Payload Type
Set the payload number of the Codec selected
in Program 84-13-12.
0, 2, 8, 96 ~ 127
(Profile 1 ~ Profile 2)
103