NEC Univerge SV9100 - Page 855

855
Program
Number
Program Name/Description
Input Data
Default
15-07-01
Programmable Function Keys
Assign function keys for External Zone Paging
(code 19 + zone), External All Call Paging
(code 20), Internal Zone Paging (code 21 +
zone) or Meet Me Conference/Paging Pickup
(code 23).
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-10-06
Class of Service Options (Answer Service) –
Meet-Me Conference and Paging
Turn Off or On an extension user ability to use
Meet-Me Conference and Paging.
0 = Off
1 = On
COS 1 ~15 = 1
31-02-01
Internal Paging Group Assignment –
Internal Paging Group Number
Assign extensions to Internal Paging Groups
(i.e., Page Zones).
0 ~ 64
(0 = No Setting)
0 for IP Station
1 for TDM
Station
31-02-02
Internal Paging Group Assignment –
Internal All Call Paging Receiving
Allow/Prevent All Call Internal Paging for each
extension. If allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented, extensions can
make (not receive) only All Call Internal Paging
announcements. If combined, Paging zones
should be restricted as well, change the internal
page zone group in Program 31-07-01 to 0.
0 = Prevent
1 = Allow
0
31-03-01
Internal Paging Group Settings – Internal
Paging Group Name
Assign name to Internal Paging Groups (i.e.,
Page Zones). The system shows the name you
program on the telephone display.
Maximum of 12 characters.