NEC Univerge SV9100 - Page 854

854
Related Features
 Meet Me Conference
 Meet Me Paging
 Paging, External
 Paging, Internal
 Programmable Function Keys
Guide to Feature Programming
 For additional programming information on Paging, refer to the features Paging, External and Paging,
Internal .
Program
Number
Program Name/Description
Input Data
Default
10-21-04
GCD-CP10 Hardware Setup – External
Source I/O Selection on GCD-CP10
Define how the I/O ports on the GCD-CP10 are
used.
0 = External MOH (AUX2)/
External Speaker(AUX1)
1 = BGM source (AUX2)/
External Speaker(AUX1)
2 = External MOH (AUX2)/
BGM source (AUX1)
Relationships between AUX
number and Relay number are as
follows:
AUX2 = Relay2
AUX1 = Relay1
1
11-12-21
Service Code Setup (for Service Access) –
Meet-Me Answer to Specified Internal
Paging Group
Customize the Service Codes used for meet-
me answer to specified internal paging group
service access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
864
11-12-22
Service Code Setup (for Service Access) –
Meet-Me Answer to External Paging
Customize the Service Codes used for meet-
me answer to external paging service access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
865
11-12-23
Service Code Setup (for Service Access) –
Meet-Me Answer in Same Paging Group
Customize the Service Codes used for meet-
me answer in same paging group service
access.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
863