NEC Univerge SV9100 - Page 862

862
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-10-16
Service Code Setup (for System
Administrator) – Leaving Message Waiting
(Requires CPU to be licensed for Hotel/
Motel)
Customize the leave message waiting Service
Codes (GCD-CP10 must be licensed for Hotel/
Motel).
MLT
0 ~ 9,
*
, # Maximum of eight
digits
726
11-11-09
Service Code Setup (for Setup/Entry
Operation) – Answer Message Waiting
Customize the answer message waiting service
code.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
841
11-11-10
Service Code Setup (for Setup/Entry
Operation) – Cancel All Messages Waiting
Customize the Cancel All Messages Waiting
service code.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
873
11-11-11
Service Code Setup (for Setup/Entry
Operation) – Cancel Message Waiting
Cancel message waiting used for registration
and setup.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
871
11-16-07
Single Digit Service Code Setup – Message
Waiting
Customize the message waiting Service Codes
used to set message waiting when a busy or
ring back signal is heard.
0 ~ 9,
*
, # Maximum of one digit
0
15-02-28
Multiline Telephone Basic Data Setup –
Message Waiting Lamp Color
Determine whether an extension Message
Waiting Lamp lights Green or Red when a
message is received.
0 = Green
1 = Red
1
15-02-35
Multiline Telephone Basic Data Setup –
Message Waiting Lamp Cycle for Calling
Extension
Select the cycle that the Large LED flashes
when the extension has set Message Waiting.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
7
15-02-36
Multiline Telephone Basic Data Setup –
Message Waiting Lamp Cycle for Called
Extension
Select the cycle that the Large LED flashes
when the extension has Message Waiting set to
the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
3
15-02-37
Multiline Telephone Basic Data Setup –
Voice Mail Message Wait Lamp Color
Select the Message Waiting flash pattern for
the station that set the Message Waiting
reminder.
0 = Green
1 = Red
1