NEC Univerge SV9100 - Page 900

900
Program
Number
Program Name/Description
Input Data
Default
20-14-06
Class of Service Options for DISA/E&M –
Internal Paging
Turn Off or On a DISA or tie trunk caller ability
to use the telephone system Internal Paging.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-07
Class of Service Options for DISA/E&M –
External Paging
Turn Off or On a DISA or tie trunk caller ability
to use the telephone system External Paging.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-14-08
Class of Service Options for DISA/E&M –
Direct Trunk Access
Turn Off or On a DISA or tie trunk caller ability
to use Direct Trunk Access (Service Code 715).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-09
Class of Service Options for DISA/E&M –
Forced Trunk Disconnect <Not for ISDN
T-point>
Turn Off or On a tie trunk caller ability to use
Forced Trunk Disconnect (Service Code *26).
This option is not available to DISA callers.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-10
Class of Service Options for DISA/E&M –
Call Forward Setting by Remote via DISA
Turn Off or On a DISA caller ability to use the
Call Forward service codes (Program 11-11-01
through Program 11-11-05).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-11
Class of Service Options for DISA/E&M –
DISA/Tie Trunk Barge-In
Turn Off or On a DISA or tie trunk caller ability
to use Barge-In.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-14-12
Class of Service Options for DISA/E&M –
Retrieve Park Hold
Turn Off or On a DISA caller ability to retrieve
parked or held calls.
0 = Off
1 = On
COS 1 ~ 15 = 0
21-05-01
Toll Restriction Class – International Call
Restriction Table
For the Toll Restriction Class you select, Assign
or Unassign the International Call Restrict Table
(Program 21-06-01).
0 = Unassign (No)
1 = Assign (Yes)
1, 6 ~ 15 = 0
2 ~ 5 = 1
21-05-02
Toll Restriction Class – International Call
Permit Code Table
For the Toll Restriction Class you select, Assign
or Unassign the International Call Permit Table
(Program 21-06-02).
0 = Unassign
1 = Assign
1, 3 ~ 15 = 0
2 = 1
21-05-04
Toll Restriction Class – Maximum Number of
Digits Table Assignment
Select the table (Program 21-06-03) to be used
to determine the maximum number of digits
allowed for outgoing calls.
1 ~ 4 = Table
0 = Disable (None)
1, 2, 6 ~ 15 = 0
3 = 1
4 = 2
5 = 3