NEC Univerge SV9100 - Page 924

924
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Station Selection (DSS) Console
Paging, External
Programmable Function Keys
Ring Groups
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-10-01
Service Code Setup (for System
Administrator) – Night Mode Switching
Customize the service code (718) used for day/
night mode switching.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
818
11-10-12
Service Code Setup (for System
Administrator) – Night Mode Switching for
Other Group
Customize the service code (618) used for Day/
Night mode switching for another Night service
group.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
718
11-12-43
Service Code Setup (for Service Access) –
Answer No-Ring Line (Universal Answer)
Customize the service code (#0) used to
manually answer a Universal Night Answer.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
872
11-12-50
Service Code Setup (for Service Access) –
General Purpose Relay
Define the service code used for turning the
general purpose relay on and off.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
880
12-01-01
Night Mode Function Setup – Manual Night
Mode Switching
Turn Off or On an extension user ability to
activate Manual Night Service.
0 = Off
1 = On
1
12-01-02
Night Mode Function Setup – Automatic
Night Mode Switching
According to a preset schedule, Enable (1) or
Disable (0) Automatic Night Service for the
system. Make sure to set the Service Patterns
in Program 12-02-01, Program 12-02-02 and
Program 12-02-03.
0 = Off
1 = On
0
12-02-01
Automatic Night Service – Start Time
For each Night Service Group, enter up to 20
start times for each Time Pattern (1 ~ 10).
The first pattern start time (Pattern 1) should
begin at 00:00 (midnight).
0000 ~ 2359