NEC Univerge SV9100 - Page 958

958
transmission. When an actual gateway device does not exist on the network, a dummy
gateway address on the same subnet must be defined.
When a paging group contains all IP phones, the page is sent via a multicast message from
the initiating IP phone. If a paging group has IP and TDM phones, when and IP phone
initiates the page, a message is sent to the CPU and the CPU sends the multicast message
for the IP phones.
To receive the All Call Page, the extension must be assigned to an Internal Page Group.
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals and Single Line Telephones
Required Component(s)
None
Related Features
 Meet Me Paging
 Meet Me Paging Transfer
 Paging, External
 Programmable Function Keys
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-12-19
Service Code Setup (for Service Access) –
Internal Group Paging
Service code setup.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
801
11-12-24
Service Code Setup (for Service Access) –
Combined Paging
Combined paging, internal/external access
code. Service code setup.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
811