NEC Univerge SV9100 - Page 996

996
Program
Number
Program Name/Description
Input Data
Default
15-06-01
Trunk Access Map for Extensions
Assign extension to have Private Line to an
unused Private Line Access Map.
Trunk Access Maps: 1 ~ 400
1
15-07-01
Programmable Function Keys
Make sure extension has a line key (e.g., 012)
for the Private Line.
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
*
00 ~
*
99 (Appearance
Function Code) (Service Code
852 by default)
21-02-01
Trunk Group Routing for Extensions
Change the routing as needed.
1 ~ 100 (Trunk Groups)
0 ~ 100
(0 = No Setting)
1
22-02-01
Incoming Call Trunk Setup
Set the Trunk Service to Type 4 if routing
unanswered Private Lines to voice mail or 0 if
not routing to voice mail.
Ring Groups: 1 ~ 100
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0
22-04-01
Incoming Extension Ring Group
Assignment
Assign extension to Private Line ring group.
Set the ringing in Program 22-06 – use option 1
for Incoming or Both Way Private Lines. Use
option 0 for Outgoing Private Lines. Do not
assign any other extensions to the Private Line
ring group.
Maximum of eight digits.
Extensions
101 ~ 108 (first
eight ports) ring
for incoming
Ring Group 1
calls. No other
extensions ring
for incoming
Ring Group 1
calls.
22-05-01
Incoming Trunk Ring Group Assignment
Assign Private Line to an unused Private Line
ring group (i.e., a ring group just for the Private
Line).
Trunks 1 ~ 400
Incoming Group Number for
Day/Night Mode (1 ~ 8):
0 = (No Setting)
001 ~ 100 = (Incoming Group)
102 = (In-Skin/ External Voice
Mail or InMail)
103 = (Centralized VM)
1
22-07-01
DIL Assignment
If routing unanswered Private Lines to voice
mail, assign DILs to the extensions.
For this selection to work, set Program
22-02-01 to 4 (DIL).
Day/Night Modes (1 ~ 8):
Extension Number (maximum of
eight digits)
Pilot Number
No Setting