Chassis Configuration Settings
GARD 8000 SYS RFL Electronics
April 1, 2012 7-57 973.334.3100
The indicator will be GREEN if there is no channel 1 - 4 level alarm.
The indicator will be RED if there is a channel 1 - 4 level alarm.
Remote Chan 1 through Remote Chan 4 RX State
Status from remote end can be Modem, High Frequency, or Low Frequency.
Reset Date and Time
Displays the Date and Time of last reset.
Remote Address Expected
Displays the expected remote address from the far end.
Remote Address Alarm
The indicator will be GREEN if there is no remote address alarm.
The indicator will be RED if there is a remote address alarm.
Channel Delay Threshold
Displays actual channel delay threshold.
Channel Delay Alarm
The indicator will be GREEN if there is no channel delay alarm.
The indicator will be RED if there is a channel delay alarm.
Modem Status Web Page definitions for column 2
Remote Rx Level 1 through Remote Rx Level 4
The actual value of level 1 - 4 received from the remote end
Can be Not Valid, or an actual dBm value.
Remote Chan 1 through Remote Chan 4 Noise Detectors
The actual received noise detector status from the remote end for channel 1 - 4.
Can be Normal or Noise Detector.
Remote Address Received
The address received by the remote end.
Address Tests Failed Since Reset
The number of address test failures since the last reset.
Channel Delay Measured
The actual one-way channel delay measurement.
Channel delay Tests Failed Since Reset
The number of channel delay test failures since the last reset.
To Next Page
Loading...