Chassis Configuration Settings
GARD 8000 SYS RFL Electronics
April 1, 2012 7-86 973.334.3100
Low Logic CLR (color):
This is the display of the user definable color used on SOE records. When an SOE event occurs
there will be a name, defined above, and color associated with the event. The color can be
defined as:
Red
Yellow
Green
Black
Blue
Change this field by clicking on the “EDIT” button directing the user to the edit screen.
Type:
The SOE triggers can be set to function only as an SOE trigger, Issue an Alarm (major system
alarm) and SOE trigger or issue an Alert (minor System alarm) and SOE trigger.
If the type is set to Alarm/Alert, that Alarm will become active when the corresponding bit
goes active. The Alarm will remain active until another SOE event occurs where the bit
becomes inactive.
Check To Enable:
Placing check in box following the trigger enables that trigger in SOE log. Only items checked
will be recorded in the SOE log .
Change this field by clicking on the check box and selecting “SAVE” or by clicking on the
“EDIT” button to go to the edit screen.
Edit:
Clicking this button will display 10 SOE triggers starting with the trigger number associated
with the “EDIT” button selected. The user can then edit the desired fields outlined above.
7.3.3.1 SOE TEXT DOWNLOAD
A recording of an SOE event may be downloaded and saved. This is a text file or information dump of
each logged SOE event. This read only file differs from other GARD web pages in that it is purely text
and can be “bookmarked” in your browser for reference at a later date. To download an SOE event
select SOE>SOE Text Download from the toolbar. The following page gives a typical example of the
information displayed. Note that only a portion of the page is shown here.
To Next Page
Loading...