Tests and Diagnostics
GARD 8000 SYS RFL Electronics
February 14, 2011 11-47 973.334.3100
PLC Module Test definitions (continued):
FSK Only
Trans Hybrid Loss
Reports the Trans Hybrid loss in dB.
Reflected Power
Reports the Reflected power in %.
SNR
Reports the Signal To Noise Ratio in dB.
SNR Alarm (Channel Fail)
Indicates whether an SNR alarm is detected: No Alarm, or Channel Fail
Trip 1 RX Counter
Indicates the Trip 1 Rx Count.
Trip 2 RX Counter
Indicates the Trip 2 Rx Count.
Trip Key 1 Counter
Indicates the Trip Key 1 Count.
Trip Key 2 Counter
Indicates the Trip Key 2 Count.
RX Alarm Counter
Indicates the Channel Fail count.
RPM Alarm Counter
Indicates the Reflected Power Meter Fail count.
ON-OFF Only
Checkback Mode
Reports the checkback mode: Disabled, Master or Remote.
Checkback Status
Indicates the status of the last checkback test.
Start Checkback/Remote Init
In Master mode it starts the checkback sequence.
In Remote mode it sends the Remote Initiate code to the master end.
To Next Page
Loading...