Printer Service Mode
Printer Service Mode
1001 Bit Switch
001 Bit Switch 1 0 1
bit 0 DFU - -
bit 1 Responding with the hostname as the sysName Model
name
(PnP name)
Hostname
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP C401SP"
1: Host name
bit 2 DFU - -
bit 3 No I/O Timeout 0:Disabled 1:Enabled
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will
have no affect. I/O Timeouts will never occur.
bit 4 SD Card Save Mode 0:Disabled 1:Enabled
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output
to paper.
bit 5 [PS and PDF] Paper size error margin ±5pt ±10pt
When a PS job is printed by using a custom paper size, the job might not be printed
because of a paper size mismatch caused by a calculation error. By default, the
error margin for matching to a paper size is ±5 points. By enabling this BitSwitch, the
error margin for matching to a paper size can be extended to ±10 points.
3. SP Mode Tables
244
To Next Page
Loading...
Need help?
General
