1001 Bit Switch
010 Bit Switch A 0 1
bit 0
to 3
DFU - -
bit 4 Not Used - -
bit 5 Store and Skip Errored Job locks the queue 0: Queue is
not locked
after SSEJ
1: Queue
locked after
SSEJ
If this is 1, then after a job is stored using Store and Skip Errored Job (SSEJ), new
jobs cannot be added to the queue until the stored job has been completely printed.
bit 6
Allow use of Store and Skip Errored Job if
connected to an external charge device.
0: Does not
allow SSEJ
with ECD
1: Allows SSEJ
with ECD
If this is 0, Store and Skip Errored Job (SSEJ) will be automatically disabled if an
external charge device is connected.
Note: We do not officially support enabling this bit switch (1). Use it at your own
risk.
bit 7
Job cancels remaining pages when the paid-for
pages have been printed on an external charge
device
Job does not
cancel
Job cancels
When setting 1 is enabled, after printing the paid-for pages on an external charge
device, the job that includes any remaining pages will be canceled.
This setting will prevent the next user from printing the unnecessary pages from the
previous user's print job.
3. SP Mode Tables
252
To Next Page
Loading...
