• User settings will be cleared.
1. Prepare an SD card.
2. Create a directory named “restore_key” inside the root directory of the SD card. Then,
save the “nvram_key.txt” file using the following name:
/restore_key/nvram_key.txt
3. Create a text file and write "nvclear".
• Write this string at the head of the file.
• Use all lower-case letters.
• Do not use quotation marks or blank spaces.
• It is judged that a forced start has been selected when the content of "nvclear" is executed and
the machine shifts to the alternate system (forced start).
4. Confirm that a message is displayed on the LCD telling to insert the SD card that contains
the encryption key.
5. Turn OFF the main power.
6. Insert the SD card that contains the encryption key into SD card slot 2 (the lower slot).
7. Turn ON the main power and the machine automatically clears the HDD encryption.
8. Turn OFF the main power when the machine has returned to normal status.
9. Remove the SD card from SD card Slot 2.
10. Turn ON the main power.
11. Memory clear SP5-801-xx (Exclude SP-5-801-001: All Clear and SP-5-801-002: Engine),
and clear SP5-846-046: address book.
• SP5-801-XXX
• Resets NVRAM data to the default settings. Before executing any of these SP codes, print an
SMC Report.
• SP5-801-001
• Initializes items.
• SP5-801-002
• Initializes all registration settings for the engine and copy process settings.
• SP5-846-046
• Displays the slot number where an address book data is in.
12. Set necessary user settings with the User Tools screen.
2. Installation
184