EasyManua.ls Logo

Ricoh MP CW2201

Ricoh MP CW2201
1176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Code Contents Solutions
67 Acquisition of the latest version
information from the Gateway
fails at the reserved date/time of
the remote firmware update from
the network.
Check that the network is connected
correctly.
68 Acquisition of the latest version
information from the Gateway
fails.
Check that the network is connected
correctly.
69 Download fails at the reserved
date/time of the remote firmware
update from the network.
Check that the network is connected
correctly.
70 Package firmware download from
the network fails.
Check that the network is connected
correctly.
71 Network communication error
occurs at the reserved date/time
of the package firmware update
from the network.
Check that the network is connected
correctly.
72 The setting of @Remote is invalid
at the reserved date/time of the
package firmware update from
the network.
Set the setting of @Remote Service in the
Administrator Tools to [Do not Prohibit].
The PDF firmware installed as standard contains a program required to print PS3 data as default.
However, this PS3 program is normally disabled.
The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the PS3
firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this specification, the
self-diagnosis result report shows the ROM part number/software version of the PDF firmware
contained in the PS3 program.
Firmware Update
605

Table of Contents

Related product manuals