1. Specifications
Specifications
General Specifications
Configuration Console
Printing Method On-demand piezo inkjet system
Color Monochrome, Full Color Printing
Nozzle Numbers 192 nozzles x 2 lines = 384 nozzles
Black (K): 768, Color (Y, C, M): 192 each
Memory 4 GB
HDD Capacity 295 GB
Originals
Type Sheet
Thickness Recommended 0.090 to 0.2 mm (64 to 190 g/m
2
)
Possible 0.035 to 1.0 mm*
1
Scan Method Face-down, center set
Delivery Top stacker or straight-through*
2
Size (W x L) Max. 914.4 x 15,000 mm (36 x 591 in.) *
3
Min. 210 x 210 mm (8.3 x 8.3 in.)
*
1
Quality is not guaranteed. A carrier sheet is required for paper less than 0.07 mm thick.
*
2
The original guide should be removed for originals thicker than 135 g/m
2
so they can exit the
back of the scanner unit.
*
3
• An original up to 960 mm (37.8") wide can pass through the scanning unit but scanned
width is limited to 914.4 mm (36").
• Width detection of Arch, ANSI sizes possible at same time.
3
To Next Page
Loading...
