Ricoh MP CW2201

Paper
Feed Method Roll paper, cut sheets (bypass feed only)
Paper Type Normal, recycled, ink jet standard, tracing paper, matte film, coated
paper (CAD), coated paper, special paper
Paper Thickness Roll 0.068 to 0.2 mm, 51 to 200 g/m
2
Sheet 0.068 to 0.4 mm, 51 to 220 g/m
2
Paper Rolls Core diameter 2 in./3 in. *
1
Circumference Less than 176 mm (7 in.)
Width*
2
mm 297, 364, 420,440, 490, 515, 594, 610, 620, 625,
660, 680, 707, 728, 800, 841, 880, 914
in. 11, 12, 13.4, 15, 17, 18, 22, 24, 30, 34, 36 in.
Paper Size W x L Max. 914.4 x 15,000 mm (36 x 590 in.) *
3
Min. 279.4 x 210 mm (11 x 8.3 in.)
Bypass Max. length: 2,000 mm (79 in.)
Image Borders Roll Less than 3 mm (all edges)
Bypass Leading edge: Less than 3 mm
Trailing edge: Less than 18 mm*
4
Left/right edges: Less than 3 mm
Straight Line Deviation Vertical Less than ±1/184 mm
Horizontal Less than ±2/841 mm
Angle Less than 1/200 mm
*
1
Roll holders easy to adjust for 2-in. or 3-in. roll cores.
*
2
The machine can handle Middle Eastern paper sizes (450, 600, 900 mm) but they cannot be
recognized by the firmware.
*
3
The maximum length applies to normal and recycled paper only. For other types of paper the
maximum length is 3,600 mm (142 in.).
*
4
Trailing edge is less than 21 mm for the following: special paper (color/standard mode, color/
quality mode), matte film (color/quality mode), tracing paper (color/quality mode).
1. Specifications
4