Ricoh MP CW2201

3008 Head Gap Adjust Mj5-16kHz
1 Adjusted Value on Fitting A [-400 to 400 / 0 / 1dot]
3 Adjusted Value on Fitting B
5 Adjusted Value on Fitting C
8 Adjusted Value on Fitting D
51 By-pass: Normal-Thick A [-400 to 400 / 0 / 1dot]
53 By-pass: Normal-Thick B
55 By-pass: Normal-Thick C
58 By-pass: Normal-Thick D
101 Paper Supply 1: Normal-
Thick A
[-400 to 400 / 0 / 1dot]
103 Paper Supply 1: Normal-
Thick B
105 Paper Supply 1: Normal-
Thick C
108 Paper Supply 1: Normal-
Thick D
151 Paper Supply 2: Normal-
Thick A
153 Paper Supply 2: Normal-
Thick B
155 Paper Supply 2: Normal-
Thick C
158 Paper Supply 2: Normal-
Thick D
3100 DRAMA DL Tool Connection Check
1 - [0 or 1 / 0 / 1]
3106 Short Paper Width Detection
Main SP Tables-3
61