Siemens HiPath 3000 Service Manual

Service
P31003-H3550-S403-4-7620, 02/05
12-82 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
service.fm
Security Features
12.6.1.2 Pre-Determined User Groups and Their Access Rights
User groups with a variable password
The following table shows the six pre-determined user groups and their access rights.
Table 12-9 Variable password concept: Pre-Determined User Groups and Their Access
Rights
No
.
User groups
User rights
User
admin.
Audit
System maint.
(Service)
Customer admin.
(Cust.)
Charge
accounting
Develop-
ment
1. ● Setting up/deleting users
● Assigning users to user groups
XX
1
1 As long as no user is assigned to the “User Administration” user group.
2. ● Assessing and archiving backup-related log
files
● Reader rights to system data (error memory,
for example), not including confidential cus-
tomer information
XX
2
2 As long as no user is assigned to the “Audit” user group.
3. ● Access rights to all system data (not including
development access rights) as long as no us-
ers are assigned to other user groups.
X
4. ● Access rights to confidential customer infor-
mation
● Executing customer actions (printing out cer-
tain lists, for example)
X
3
3 As long as no user is assigned to the “Customer administration” user group.
X
5.
● Access rights to non-confidential customer
information
XX
6. ● Access rights to parameters and call detail
recording actions (not including interface pa-
rameters for the output device)
X
3, 4
X
4
4 As long as no user is assigned to the “Accounting” user group.
X
7.
● Access rights of the “System Maintenance”
user group
● Setting up and reading certain parameters to
which no other user group has access.
X

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English