licensing.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
8-17
Licensing
Licensing Scenarios
8.4.4 Upgrading to HiPath 3000 V5.0, HiPath 5000 V5.0
To upgrade from a version earlier than 5.0 to HiPath 3000 V5.0 or HiPath 5000 V5.0, you must
request a new license file and repeat the licensing procedure.
The Central License Server (CLS) enables the old licenses (< V5.0) to be converted into new
licenses that are valid for version 5.0.
The following features that are subject to mandatory licensing are converted:
● HG 1500 B channels (previous designation: max. no. of B channels)
● HiPath ComScendo licenses (previous designation: max. no. of workpoint clients)
● IP Sec
● CA functionality
● Feature Server (previous designation: HiPath 5000 RSM)
Features that were not previously subject to mandatory licensing cannot be migrated. The base
station BS4 is a new product. DIUN2 (S30810-Q2196-X), TS2 (S30810-Q2913-X300) and
TS2R (S30810-K2913-Z300) are new boards. Up to now, no license was required for the IVM
announcement feature. These features are released with the maximum configuration following
an upgrade.
● BS4 (number of B channels per BS4)
● DIUN2, TS2, TS2R (number of B channels per port)
● IVM announcements (IVM boards, number of B channels per port)
Procedure
Step Activity (Remarks)
1. Web-based Management (WBM) (in the event that the MAC addresses are not
already available):
Determine the MAC addresses (locking IDs) of all HG 1500 boards belonging to the
HiPath 3000 system to be upgraded.
If this involves the networking of several HiPath 3000 systems, then the MAC ad-
dresses (locking IDs) of all available HG 1500 boards are to be determined.
To Next Page
Loading...
Need help?
General