Siemens HiPath 3000 - Figure 10-23 Optipoint 410 Advance - Standard Key Assignment (Default)

Workpoint Clients
P31003-H3550-S403-4-7620, 02/05
10-48 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
wclient.fm
IP Telephony (Voice over IP)
Standard key assignment (default) for optiPoint 410 advance
Refer to Section 10.6.1.3 for information on connection and startup.
Figure 10-23 optiPoint 410 advance - Standard Key Assignment (Default)
Service Programmable
Number redial Programmable
Microphone on/off Programmable
Loudspeaker Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Disconnect