service.fm
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
12-77
Service
Remote Service
12.5.6 Controlled Release of a Remote Connection
With version 1.2 and later, you can initiate the controlled release of a remote connection (with
analog or digital modem) between the HiPath 3000 and HiPath 3000 Manager E as follows:
● Disconnect according to action (Default setting)
After completing an action (e.g. CDB backup or APS transfer), the remote connection is
automatically disconnected.
● Disconnect according to release time
After completing an action (CDB backup or APS transfer, for example) and the adjustable
release time sequence (60 ... 9999 s), the remote connection is disconnected.
● “Hang up” button
By pressing this button, you can disconnect the remote connection manually.
Use HiPath 3000 Manager E to select any one of these options.
12.5.7 Remote Administration and Access Using PPP
You can establish a connection between the system/Plus product and the service center using
either the integrated digital modem (B channel) or the integrated analog modem (IMODN). Data
is exchanged in both cases using Point-to-Point-Protocols (PPP).
For further information see "Features via LAN" in the HiPath 3000/5000 Feature Description.
12.5.7.1 Remote System Administration
You can also operate HiPath 3000 Manager E in conjunction with the relevant infrastructure
(RDT network, router) using PPP.
For further information, see "Remote Administration of HiPath 3000 via PPP" in the HiPath
3000/5000 Feature Description.
12.5.7.2 Remote Administration of Plus Products
You can manage Plus products from a central location using HiPath 3000. However, HiPath
3000 only provides the means of transmission. The Plus product is actually administered using
special software programs like pcANYWHERE.
For further information, see "Remote Administration of Plus Products via PPP" in the HiPath
3000/5000 Feature Description.
To Next Page
Loading...
Need help?
General